Processing
Twin-Screw Extruder

Dr. Collin Teach-Line ZK25T

  • Screw diameter: 2 x 25 mm
  • L/D: 18
  • Screw speed : 210 rpm
  • Screw torque: 2 x 44 Nm
  • Temperature : 25°C to 350°C
Autoclave
  • American Autoclave Co.
  • Working space: 508 mm diameter, 915 mm in length
  • Design working temperature: 300°C
  • Design working pressure: 200 psi
  • Stainless steel part vacuum lines and fittings, 4 sets
Hot Melt Prepregger

Research Tools Model 40

  • Drum circumference: 190 cm
  • Drum width: 30 cm
  • Drum rotation speed: up to 7.5 RPM
  • Drum carriage speed: up to 1.27 cm/minute
  • Temperature of resin pot: room temperature to 150°C
Hydraulic Hot Press (Vacuum and Lamination Hot Press)

TMP 20" x 20" - 1- 50 Ton

  • Platens size: 508 mm x 508 mm
  • Platens opening: 254 mm
  • Max. temperature: 350°C
  • Max. force: 455 kN
  • Vacuum capability: 744 mm Hg to 754 mm Hg
Tube Furnace "ThermoConcept"

Model :        ROHT 75/300/18 ;

Controller :   Eurotherm 3208 + 3216 ;

Max. temp. : 1800 °C ;

Power :         4000 W ;

Tube internal diameter : 45 mm (1.75" );

Heating Zone : 300 mm ;

Gas supply : Nitrogen .

Furnace 1280C Nabertherm N11/H #2
  • P300 program controller with 9 programs of 40 segments(20 ramp, 20 dwell)
  • Maximum operating termperature: 1280 °C ;
  • Heating Power : 3500W ;
  • Internal dimensions : 250 * 350 * 140 (W*D*Hmm) ;
  • Max allowed charge weight : 15 kg uniformly distributed load
Furnace 1700°C Carbolite

Model :        HTF 17/5 ;

Controller :   Eurotherm 3216P1 + 2132 ;

Temp. range : 1300~1700 °C ;

Power :         4300 W ;

Internal dimensions (WxDxH): 158 x 225 x 150 mm ;

Maximum Load : 2.5 kg

Memmert Oven: Heating and Drying

 

Model :        UFE500 ;

Temperature Range : from +20 °C (however, at least 10 °C above ambient) up to +300 °C;

Power :         2000 W ;

Internal dimensions (WxDxH) : 560 x 400 x 480 mm ;

Vacuum Oven Analog Temp. control

 Model : "Shellab" 1430 ;

Chamber capacity: 47 liters (1.7 Cu FT) ;

Temperature range: 40 - 245 °C ;

Heat up time, minutes: 30 @ 100 °C ;

Power :         800 W ;

Current:        3.0 A ;

Internal dimensions (WxDxH): 305 x 508 x 305 mm (12" x 20" x 12")

 

Humidity Chamber

Chamber :

Interior size: 500 * 600 * 500 (W * H * D mm)

Temperature control :

  • Temperature : -40 °C to 110 °C (+/-0.5°C) ;
  • Temperature distribution: +/- 2 °C ;
  • temperature ramping rate: -40 °C to 100 °C about 45 min.

                      20 °C to -40 °C about 55 min.

Humidity control :

  • Humidity range: 20% to 98% (+/-2.5%R.H.) ;
  • Humidity distribution: +/-3%R.H.

 

Ultracut & Ultramicrotome and EM FCR

Leica ultracut-R ultramicrotome and EM FCR low temperature sectionion system

  • Cutting range setting from 2 - 10 mm length
  • Stepping motor from 200 µm specimem drive for 10 mm manual N-S movement of the knife
  • Dual sided self-locking drive for 25 mm E-W movement
Misonix XL2020 Sonicator
  • Output Frequency           20 kHz
  • Convertor Material          Aluminum
  • Convertor Horn/Probe Attachment         1/2-20 threaded hole
Centrifuge Z 326

• max. Speed : 18000 rpm
• max. RCF: 23542 xg
• max. Volume: 4 x 100ml
• Speed range: 200 - 18000 rpm
• Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
• Dimensions (WxHxD): 40 cm x 36 cm x 48 cm
• Weight: 43 kg

Hydraulic Hand Press

Maximum Pressure : 12 Tons;

Press stage              : 6 inches *6 inches ;

Ram stroke              : 5 inches.

Furnace 1300C Carbolite

Model : CWF 13 / 13

Controller :   Eurotherm 3216P1 ;

Max. temp. : 1100 °C ;

Power :         3100 W ;

Internal dimensions (WxDxH): 200 x 325 x 200 mm ;

Maximum Load : 13 Litres

Diamond Precision Saw

Model : ISOMET 1000 ;

Wheel Speed : 100 ~975 r.p.m. ;

Moter Power : 90W (1/8 HP);

Blade Diameter : 6 inches  (152mm);

Blade Thickness : 0.020" (0.5mm).

Vacuum Oven Digital Temp. control

Model : "Shellab" 1445-2 ;

Chamber capacity: 47 liters (1.7 Cu FT) ;

Temperature range: 20 - 240 °C ;

Sensitivity :  1 °C;

Ampere :         5.5A @ 220Vac ;

Internal dimensions (WxDxH): 305 x 508 x 305 mm (12" x 20" x 12") ;

Tube Furnace "BlueM"

Model :        BF51524C + STF54434C;

Controller :   Eurotherm 3504 + 3216 ;

Max. temp. : 1700 °C ;

Power :         5000 W ;

Tube internal diameter : 45 mm (1.75" );

Heating Zone : 300 mm ;

Gas supply : Nitrogen .

Furnace 1280C Nabertherm N11/H #4
  • P300 program controller with 9 programs of 40 segments(20 ramp, 20 dwell)
  • Maximum operating termperature: 1280 °C ;
  • Heating Power : 3500W ;
  • Internal dimensions : 250 * 350 * 140 (W*D*Hmm) ;
  • Max allowed charge weight : 15 kg uniformly distributed load
Furnace 1280C Nabertherm N11/H #5
  • P300 program controller with 9 programs of 40 segments(20 ramp, 20 dwell)
  • Maximum operating termperature: 1280 °C ;
  • Heating Power : 3500W ;
  • Internal dimensions : 250 * 350 * 140 (W*D*Hmm) ;
  • Max allowed charge weight : 15 kg uniformly distributed load
Furnace 1280C Nabertherm N11/H #6
  • P300 program controller with 9 programs of 40 segments(20 ramp, 20 dwell)
  • Maximum operating termperature: 1280 °C ;
  • Heating Power : 3500W ;
  • Internal dimensions : 250 * 350 * 140 (W*D*Hmm) ;
  • Max allowed charge weight : 15 kg uniformly distributed load